Visit Power-Packer at the Work Truck Show 2019

Visit Power-Packer at the Work Truck Show 2019

Come and see Power-Packer’s hardworking hydraulic outriggers at the Work Truck Show 2019 starting tomorrow at the Indiana Convention Center in Indianapolis. The annual show kicks off on Wednesday, March 6, and runs through Friday, March 8. Look for Power-Packer in Booth #4781 where we will showcase our customizable hydraulic outrigger systems for crane trucks, our new IP-rated hydraulic latch, and our hydraulic cab tilt systems. Power-Packer experts will also be on hand to answer questions and help you customize the best solution for your needs.

Hardest Working Outriggers in the Industry
Specifically designed for work truck applications, Power-Packer’s hydraulic outrigger systems provide safe, stable support for work trucks with a lift capacity up to 14,000 lbs and up to a 42″ outrigger extension. We offer 2.25” and 3.0” bore hydraulic stabilization legs with a long, power-out cylinder for fast and reliable outrigger extension. Power-Packer legs are available in square and round configurations to fit seamlessly into virtually any work truck.

Across the U.S., Power-Packer outriggers offer enhanced safety and efficiency on work trucks in applications including utility work, construction and the military. Over the past year, Power-Packer engineers have teamed with customers to provide a range of unique outrigger solutions, including designing and prototyping a dual extend system. Contact us now to discuss your specific needs.


Meet Our Tough New IP67 Rated Latch
Your equipment has to perform in any environment, and Power-Packer can help ensure that it does. Our new IP67 level hydraulic latch is precision designed to withstand dust, dirt, grime and moisture. The Ingress Protection (IP) rating classifies the degrees of protection for a device against both solids and liquids in electrical enclosures. With an IP67 rating — one of the highest levels on the IP scale — this Power-Packer hydraulic latch is dust tight and safe from immersion in water up to a full meter in depth.


Cab-Tilt Systems
Power-Packer’s complete range of cab tilt systems and hood assist units make it possible for us to design a cab tilting system that is perfectly matched to your application. We can offer you a better fitting system, which results in a better performing system and a safer, more efficient and productive work environment.

 


About the Work Truck Show 2019
Along with Power-Packer, The Work Truck Show will feature more than 500 other exhibitors in over 500,000 square feet of exhibit space. In 2018, the show drew a record crowd of 13,570 industry professionals. The show is the ultimate resource for fleet managers, truck dealers and equipment distributors, allowing you to:

  • See the latest vocational truck and equipment displays, with product experts available at exhibitor booths 
  • Find solutions to critical technical questions 
  • Attend educational sessions that address specific challenges
  • Interact with thousands of peers
  • Gain insight into recent industry and market trends

Owned and operated by NTEA, the Association for the Work Truck Industry, The Work Truck Show is North America’s largest work truck event. It offers a once-a-year chance to see all of the newest industry products, choose from dozens of industry-focused training courses, and gain access to technical engineering representatives from hundreds of exhibiting companies. Exhibition hall hours run from 10 a.m. on Wednesday, March 6, through noon on Friday, March 8.


Need a Hydraulic Solution? We’re Here to Help.
The majority of products and systems shipped by Power-Packer require some degree of customization. Our skilled engineers are standing by to work with you to develop hydraulic position and motion control solutions that precisely fit your needs and allow you and your customers to work smarter, safer and more efficiently. Contact us now.